Modern offices require a unique and completely integrated communication solution. Presenting: Matrix VISIONULTRA412P, a premium feature packed PBX specially designed for modern offices. It is packed with unique features that are powered by Microcontroller based design. Designed after a study of the way in which modern businesses operate; Matrix VISIONULTRA412P offers integrated solutions for your communication problems.
SMT hardware design ensures a very compact design and low power consumption. SLIC used for the extension interface ensures robust, reliable and maintenance free performance. The unique features provided in the system ensure smooth and efficient call management. Special features are provided that give professional response to the callers, hence enhancing the image of the organization. Matrix VISIONULTRA412P is "The PBX for Office", designed for those who don't compromise.
Get the power of Matrix VISIONULTRA412P for your office. Because those who compromise cannot have accelerated growth!
Matrix VISIONULTRA412P is built around Microcontroller based architecture and utilizes state-of-the-art Surface Mount Technology (SMT). Coupled with SLIC based design, the system ensures robust, reliable and maintenance free performance.
VISIONULTRA412P offers optional connectivity of Door Phone Port and Digital Output Ports
The system offers built-in Auto-Attendant, Security Dialer, Internet Ready Port, DTMF and FSK CLI, Digital Input Port, Analog Input Port, Analog Output Port, Remote Status Display Port, Remote Programming, etc., normally are not available in most other systems, and even if available they warrant additional investment.
VISIONULTRA412P offers efficient call management with the features like Alternate Number Dialing, Auto-Attendant and CLI based Routing. It can have a complete control over telephone cost through its intelligent features like Allowed and Denied Lists, Least Cost Routing, SMDR Reports and Live Call Supervision. It also helps in enhancing image of the organization through its unique features like Name Programming and Dial-by-Name.
Make the winning difference for your organization by switching to Matrix VISIONULTRA412P because only those grow faster who don’t compromise!
Language:
PBX with 4 Trunk Lines and 12 Extensions with Premium Features
Introduction
Key Features
Allowed and denied list
VISIONULTRA412P prevents misuse of long distance and international dialing to control telephone cost. A comprehensive list of numbers can be included in the Allowed and Denied Lists. However, it allows dialing of a few numbers and restricts dialing of other numbers in the same area. For example: An extension can dial only '22-628-5738' but not any other number starting with ‘22’
Alternate Number Dialing
Whenever redial or auto redial is used, the VISIONULTRA412P dials out the next alternative number instead of the same number that is found engaged
Auto Attendant
The caller can directly reach an extension without the help of an operator. VISIONULTRA412P has a built-in Auto-Attendant playing different message like welcome message, Dial-by-Name, Dial Extension, Busy, No-Reply, Transferring to Operator, etc. These messages can be recorded in a 4-minute voice module. It also allows the caller to a desired extension by dialing the name of the extension user.
Auto Redial - Multiple Numbers
VISIONULTRA412P redials a busy number till it gets through. The user is free to concentrate on his work while the system is trying a busy number. The extension gets a ring and the number connected to is displayed on the telephone when the call goes through. Each user can submit up to 3 numbers for auto redial.
Battery Charger Circuit
VISIONULTRA412P has a built-in battery charger circuit which can be connected to 24VDC, 7AH battery. It gives a back-up time of 4 hours. In case of power failure, the system power switches over to battery and on resumption it switches back to the mains power supply.
Caller Line Identification (DTMF and FSK)
With this function, VISIONULTRA412P identifies the phone number of the caller and displays it on the telephone. The CLI is displayed for both internal and external caller. Even in case of a call being transferred from one extension to another, the VISIONULTRA412P informs about both the numbers. For Functioning of CLI, the trunk line should support DTMF CLI.
Class of Service
VISIONULTRA412P allows the supervisor to decide upon the access rights to features for each extension, thus allowing you to configure the system as per your requirements. For example, extension 201 (middle management executive) can have features like conference, Auto Redial, Abbreviated Dialing, Alarms, Do-not-Disturb and call transfer only; whereas Extension 501 (pantry) can be configures to dial intercom numbers only.
CLI based External Call Forwarding (ECF)
VISIONULTRA412P offers the facility of forwarding selective incoming calls to a desired external number. Selective call forwarding is possible by defining a string of numbers. For example, the system could be programmed such that all numbers with a prefix "22" are forwarded to the residence number, however number can be forwarded to the mobile number.
CLI based Routing
VISIONULTRA412P can be programmed such that particular numbers land at specified extensions directly without the assistance of an operator, thus saving time and cost for the callers. It is of great utility in case of long distance calls.
Digital Output Ports
VISIONULTRA412P provides an option of connecting three Digital Output Ports, thus enabling three electrical devices like Door Lock, Relay Port, Fan, etc. to be operated simultaneously. These non-energized DOPs can be switched ON/OFF manually or automatically. DOPs can be operated locally as well as from remote location.
Direct Inward System Access (DISA)
VISIONULTRA412P allows a user to access its resources from a remote location, to make calls to and from any of the stations, activate/deactivate features of any station, and even program or administer the system.
External Music Port (AIP)
An external music source like a CD player or FM radio can be connected to VISIONULTRA412P . It can be used to play a desired piece of music to the caller on hold.
Fax Homing
Voice and fax calls can be received on the same trunk. VISIONULTRA412P automatically directs an incoming fax call to an extension where a fax machine is connected.
Inbound Call Analysis
500 incoming calls can be stored in the memory of VISIONULTRA412P with details such as caller's number, trunk, extension, date and time of the call, call duration etc. These calls can be analyzed with the help of multiple filters like caller's number, extension, call duration, etc. Results of the analysis can be sent to a computer through the RS232C port.
Internet Ready Port
A special port is provided to connect the modem to VISIONULTRA412P .This port connects the modem directly to the trunk line eliminating noise and increase data transfer speed. Further it is an extra port leaving all regular extension ports for voice calls.
Jeeves
Matrix VISIONULTRA412P comes along with Jeeves- a Windows based Graphic User Interface (GUI) software tool for programming the system. It is intuitive, user friendly and supports languages like English, French, Spanish, German, Russian, Portuguese and Italian. Jeeves makes programming of VISIONULTRA412P a child’s play!
Least Cost Routing
VISIONULTRA412P can be programmed to ensure least cost incurred for each call by choosing specific trunk lines based on their prevailing tariffs. This function has a great utility now with the presence of multiple basic service providers offering various tariff plans for diverse destinations during different timings.
Live Call Supervision
VISIONULTRA412P allows you to define feature access code as per your convenience. It offers the users great convenience as they do not have to remember the new codes in case of change of the system.
Programmable Access Codes
VISIONULTRA412P allows you to define feature access code as per your convenience. It offers the users great convenience as they do not have to remember the new codes in case of change of the system.
Resetable Fuse
VISIONULTRA412P is accompanied with an auto-resetable fuse on trunk and extension lines. Hence VISIONULTRA412P assures complete protection against high voltages from trunk as well as extension lines thereby increasing reliability of the system.
Scheduled Dial Facility
VISIONULTRA412P can be programmed to enable/disable dialing trunks at a pre-specified time. This facility is of great use to lock long distance and international lines at set timings thereby preventing misuse.
Security Dialer
VISIONULTRA412P provides built-in Digital port to connect any type of sensor like glass break sensor, smoke detector, etc. a highly effective security feature that dials 3 different numbers and plays a pre-recorded message in case of an emergency. ighly effective security feature that dials 3 different numbers and plays a pre-recorded message in case of an emergency.
Remote Status Display Unit
VISIONULTRA412P provides built-in RSD port to which accessory - the RSD Unit can be connected. It displays status of 16 stations, Door Phone port/station, SMDR Buffer, System Day/Night Mode and Trunks.
SLIC Based Design
Excellent loop resistance and improved speech performance. With no moving parts, the durability of VISIONULTRA412P increases, besides it also leads to low power consumption.
SMDR
VISIONULTRA412P provides detailed report generation and printing for all outgoing and incoming calls with strong filtering capability and separate buffer capacity for each category - 500 incoming and 500 outgoing calls.
Station and Trunk Name Display
Each time you get a call, the caller’s name shall be displayed on your extension. This feature is available on all single line telephones as well as on trunk lines
Features List
| 3-Participants Conference | External Call Forward (All, Selective) |
| Abbreviated Dialing (Global, Personal) | Fax Homing |
| Alarms (Duration, Remote, Daily, Time) | Flash Timer |
| Alternate Number Dialing | Flexible Numbering |
| Allowed and denied list | Hold |
| Analog Input Port (External Music Port) | Hotline (With Delay, With Number) |
| Analog Output Port (AOP- PAS Port) | Interrupt Request |
| Auto-Attendant | Internet Ready Port |
| Auto Call Back (Busy, No reply) | Last Number Redial |
| Auto Redial-Multiple Numbers | Least Cost Routing |
| Barge-In | Live Call Supervision |
| Battery Backup | Music-on-Hold - Internal, External, Voice Module |
| Behind the PBX Applications | Operator |
| Boss Ring | Paging |
| Call Duration Control (All, Selective calls) | Power Down Mode |
| Call Forward (All, Busy, No reply) | Privacy |
| Call Park | Programmable Access Codes |
| Call Pick Up (Group, Selective) | Raid |
| Call Progress Tones | Real Time Clock |
| Call Splitting | Remote Programming (from SLT, Mobile) |
| Call Transfer (On Ringing, Busy, Screened, Trunk to Trunk) | Remote Status Display |
| Class of Service (CoS) | RS232C Port |
| Calling Line Identification and Presentation (Caller Line Identification-DTMF | Scheduled Dialing |
| CLI based ECF | Security Dialer-3 Numbers |
| CLI based Routing | Station Group |
| Computer Connectivity | Station and Trunk Name Display |
| Configuration Reports | Station Message Detail Recording (SMDR)-Incoming and Outgoing |
| Continued Dialing | Selective Trunk Access |
| Country Settings (India, Italy, Spain, USA/Canada, Australia) | System Security (Passwords) |
| Dial-by-Name | System Timers |
| Digital Input Port (Sensors) | System Programming(from SLT, Jeeves) |
| Digital Output Port (Control Applications)# | Time Table |
| Day Night Mode (Auto, Manual) | Toll Control |
| Department Call (Pilot Number) | Trunk Access and Landing Groups |
| Direct Inward Dialing (DID) | User Security (Passwords) |
| Direct Inward System Access (DISA) | Voice Message for Auto Redial |
| Distinctive Rings | Voice Greetings for Alarms |
| Door Lock# | Voice Message for Day and Night |
| Door Phone(2-Wire/4-Wire)# | Voice Guided help for DOSA & DID (Busy, No reply, Transfer, Wrong Dial) |
| Dynamic Lock (Auto, Manual) | Voice Message for Security Dialer |
| Emergency Dialing (Country Specific) | Walk-in Class of Service |
| # Optional module required | |
Technical Specifications
TECHNOLOGY
| Type of Switching | Space Division (Cross Point) |
SLT(ANALOG STATION)
| Signaling | Loop Start |
| Dialing | DTMF and Pulse (10/20PPS) |
| Off Hook AC Impedance | 600Ω |
| Off Hook Current | 39mA Max. |
| Loop Limit | 270Ω Max (Excluding Telephone) |
| On-Hook Voltage (Tip/Ring) | -48V Nominal |
| DTMF detection | ITU-T Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >40dB |
| Ringing | Trapezoidal 50Vrms/30Hz |
| REN | 3 |
| CLI Presentation | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Protection | Over Voltage Secondary Protection |
| Physical Connector | Push Type (Single Pair Wire, 0.5mm) |
TWT (2-WIRE TRUNK)
| Signaling | Loop Start |
| Loop Limit | 1200Ω |
| Off Hook AC Impedance | 600Ω |
| Pulse Dialing | 10/20 PPS |
| DTMF Dialing and Reception | ITU-T Q.23 and Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >40dB |
| CLI Reception | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Call Maturity | Delay and Polarity Reversal |
| Protection | Over Voltage and Over Current Secondary Protection |
| Physical Connector | Push Type (Single Pair Wire, 0.5mm) |
Transmission Parameters (Between FXO-FXS)
| Insertion Loss | <1dB |
| Inter-Channel Cross Talk | <-65dBm |
| Idle Channel Noise | <-70dBmOp |
Auxiliary Ports
| Analog Input Port | 0.7 Vrms, Isolated, 1KΩ, Push-Type Connector |
| Analog Output Port | 0.7 Vrms, Isolated, 1KΩ, Push-Type Connector |
| Digital Input Port | Loop Sensing-Open/Close, 5mA, Push-Type Connector |
| Digital Output Port | VDC Max. =60VDC, IDC Max. = 0.15A, Push-Type Connector |
| Door Phone Port | 2-Wire/4-Wire Door Phone |
Power Supply
| Input | 90-265VAC, 47-63Hz |
| Power Consumption (Typical) | 20W |
| Battery Back-up | 24VDC, 7-10AH |
Mechanical
| Dimensions (WxHxD) | 25.5x32.7x7.5cm (10"x12.9"x2.9") |
| Unit Weight | 1.8kg (4.0lbs) |
| Shipping Weight | 3.6kg (7.9lbs) |
| Installation | Wall Mount |
Environment
| Operating Temperature | 0°C to 50 °C (+32°F to +122°F) |
| Operating Humidity | 5-95% RH, Non-Condensing |
| Storage Temperature | -20°C to 60°C (-4°F to +140°F) |
| Storage Humidity | 0-95% RH, Non-Condensing |
Matrix Range of SOHO PBX
| PROTON103 | 1 Trunk Line and 3 Extension Lines PBX |
| PROTON205 | 2 Trunk Line and 5 Extension Lines PBX |
| PROTON206 | 2 Trunk Line and 6 Extension Lines PBX |
| PROTON308 | 3 Trunk Line and 8 Extension Lines PBX |
| VISION206S | 2 Trunk Lines and 6 Extension Lines PBX with Standard Features |
| VISION308S | 3 Trunk Lines and 8 Extension Lines PBX with Standard Features |
| VISION309P | 3 Trunk Lines and 9 Extension Lines PBX with Premium Features |
| VISIONULTRA206P | 2 Trunk Lines and 6 Extension Lines PBX with Premium Features |
| VISIONULTRA308P | 3 Trunk Lines and 8 Extension Lines PBX with Premium Features |
| VISIONULTRA412P | 4 Trunk Lines and 12 Extension Lines PBX with Premium Features |
| VISIONULTRA616P | 6 Trunk Lines and 16 Extension Lines PBX with Premium Features |